Wireless LED Light RGB - (steady or changing colors)

Instructional Information

Instructional Information

  1. Remove the battery covers and Insert 4 x D cell batteries in each compartment as indicated by the diagram in the compartment.
  2. Replace the battery compartment covers. You are now ready to use your wireless LED Light.
  3. Push the power switch to the on position. Turn the power switch off when the product is not in use to save battery life.  There is a slight power drain if the switch is left on.
  4. There are two buttons.  One button is to select a color change mode.  Every time you push this button there is a new combination of colors.  The second button is to stop the color change on a desired color or combination of colors.
  5. There are 5 color change modes; red-green-blue, red-green, red-blue, blue-green, and white only.  Press the stop button when a color is at its brightest or at any time colors are changing to mix colors.
  6. The support collar is designed for 2” diameter poles down to ¾” diameter. In general the light will be installed so it is directly under the table top and shining down.  Install the support collar on the table pole so it fits into the light fixture.  Do not over tighten the thumb screws.  The light can also be used shining up by simply resting the fixture on the bottom of the pole without using the collar.  Or, the collar can be installed anywhere on the pole.
  7. The lens cover can be removed by gently twisting it counter clockwise.  However, we recommend using the light with the lens cover on to protect the LED lights.  The lens cover also helps give a more even distribution of light.
  8. This product can be powered by a plug in adapter with an output of 6V DC current.  Remove the batteries when using an adapter.  Electrical current of more than 6V DC will damage the LEDs.  When using an adapter, the plug polarity must be correct.  If the product does not come on immediately, quickly turn it off and change the plug polarity to prevent permanent damage.

 

Warning: This product is not waterproof and is designed for indoor use.  It should not be used under wet conditions.